Magellan MG6250 Manuale Utente Pagina 30
- Pagina / 44
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Page 30
System Setup: System Test
4. Select 11-System Test
sub-menu, then press ok.
Test Signal Strength
The signal strength indicators outlined in table 2 apply to
zones, outputs, keypads, repeaters, and sirens.
NOTE: For each programmed wireless device, the signal
strength (represented by a numerical value) and resulting
description, will be displayed on-screen.
5. Press ok.
6. Press next.
7. Keep pressing next to
view and hear the signal
strengths of your wireless
transmitters for all zones, outputs, keypads, repeaters, and
sirens.
NOTE: Signal strength will only appear for devices with
wireless transmitters. For instance, if zones 1 and/or 2 are
assigned as hardwired zones, their signal strengths will not
appear. In addition, if no wireless zone is assigned, No Zone
Prog. will appear on-screen – the same applies to outputs,
keypads, repeaters, and sirens. Refer to their respective
sections in this manual for details on how to program these
devices.
Test Reporting
8. Press ok.
9. Wait for the GPRS test
results, or press cancel to
quit.
10. Once complete, the GPRS
test result will appear. The
console will then perform
a landline test, followed
by a GSM test.
Table 2: Signal strength indicator for wireless transmitters
Signal Strength Result
8 to 10 Strong signal
5 to 7 Average signal
1 to 4 Weak signal (relocate)
11-System Test
ok next exit
Signal Strength
ok next exit
Noise Floor: Low
next exit
Zone 01: Good 10
next exit
Test Reporting?
ok next exit
GPRS test:
cancel
wait
GPRS test: OK
- Menu Programming Guide 1
- Introduction 3
- Description of Menu Keys 3
- Initial Power-up 3
- The Menu Flow 4
- 1. Zones 5
- System Setup: Zones 6
- 2. Areas 7
- 3. Outputs (PGMs) 8
- System Setup: Outputs (PGMs) 10
- 4. Keypads 13
- Compatible Keypads 14
- 5. Repeaters 15
- System Setup: Repeaters 16
- 6. Sirens 17
- 7. Doorbells 18
- Programming Sequence 19
- 8. Delays/Tones 20
- 9. Communicator 22
- System Setup: Communicator 24
- 10. Installer ID 27
- 11. System Test 29
- System Setup: System Test 30
- 12. StayD Path 31
- 13. Version Number 33
- System Setup: Version Number 34
- Trouble Display 35
- System Reset 35
- Demo Mode 35
Commenti su questo manuale
Prodotti e manuali riguardandi Sistemi di controllo di accesso Magellan MG6250
(40 pagine)Bosch ROTAK 37LI Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Bosch ROTAK 37LI.
Wir stellen 1 PDF-Handbücher Bosch ROTAK 37LI zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Handbuch
Technology